Description
| Robust IP68 Water Submersible Enclosure, Solution Without Cabinet |
| 1 sec On-line Realtime Measurement |
| 0.05 W Ultra Low Power Consumption, Ideal for Outdoor Applications |
| Temperature Compensation |
| High Reliability, Drift Free |
| Lightening and Surge Protection for Power and RS485 Communication |
| 1.2 Km RS485 Digital Communication, Minimize Cabling and Engineering Cost |
| Software Configuration Calibration and Data Monitoring |
| Standard Modbus RTU Protocol, Direct Connected with PLC, HMI, Eliminate I/O Module Cost |
| Auto Cleaning, Almost No Maintenance |
| Not Affected by Pressure Fluctuation(1~15kg f/cm2) |
| No Reagent and Membrane, Almost No Consumable |
| pH Compensation (pH 6-8) |
| Integration Additional Sensors such as Conductivity, TDS or ORP |
| No Inlet Water Alarm Output |
| Type | Applications | Measurements | Order Selections |
|---|---|---|---|
| A | Source Water (River, Reservoir) | Pressure Level pH Temperature Conductivity Dissolved Oxygen Turbidity Nitrate (NO3- ) Ammonium (NH4+) Chloride (CL-) Nitrite (NO2-) | SMR01 SMR02 SMR04 SMR06 SMR07 SMR09 SMR10 SMR21 SMR23 SMR27 SMR28 |
| B | Ground Water | Pressure Level pH Temperature Conductivity | SMR01 SMR02 SMR04 SMR06 SMR07 |
| C | Water Treatment | Pressure Level Free Chlorine pH Conductivity TDS Turbidity Salinity Differential Pressure | SMR01 SMR02 SMR03 SMR04 SMR07 SMR08 SMR10 SMR11 SMR14 |
| D | Water Distribution | Pressure Level Free Chlorine pH Temperature Conductivity TDS Turbidity | SMR01 SMR02 SMR03 SMR04 SMR06 SMR07 SMR08 SMR10 |
| E | Wastewater Effulence | Level pH Temperature Conductivity Dissolved Oxygen Suspended Solid Nitrate (NO3-) Chloride (CL-) | SMR02 SMR04 SMR06 SMR07 SMR09 SMR12 SMR21 SMR27 |
| F | Fisheries, Aquarium and Aquaculture | Level pH Temperature Dissolved Oxygen Turbidity Salinity Level Free Chlorine ORP Temperature Nitrate (NO3-) Ammonium (NH4 | SMR02 SMR04 SMR06 SMR09 SMR10 SMR11 SMR02 SMR03 SMR05 SMR06 SMR21 SMR23 |
| G | Factory, Commercial Building | Conductivity TDS Humidity and Temperature Differential Pressure | SMR07 SMR08 SMR13 SMR14 |
| H | Weather | Humidity Barometer Wind Speed and direction | SMR13 SMR15 SMR24 |
| I | Environment I (Strain, Landslide, Level) | Rain Gauge Pyranometer Level (water pressure) Vibration Wire Input Noise | SMR29 SMR30 SMR02 SMR19 SMR26 |
| Type | SMR03-1: Free Chlorine Analyzer (without pH sensor compensation) SMR03-2: Free Chlorine and pH Analyzer (with pH sensor compensation) |
| Measurement range | 0 ~ 5 ppm |
| Accuracy | 0.01 ppm (0~0.5 ppm); 0.02 ppm (0.5~2 ppm); 0.1 ppm (2~5 ppm) |
| Resolution | 0.01 mg/L |
| Repeatability | ±1% FS |
| Temperature compensation | 0~85 °C |
| Automatic pH compensation | 6-8 pH (SMR03-2) |
| First setup time | 1 hours |
| Auto cleaning | rotating glass ball |
| Electrode material | platinum (cathode), copper (anode) |
| Operating pressure | 1~15 Kgf/cm2 |
| Operating temperature | 0~85 °C |
| Response time | IP68 |
| Temperature Sensor | Pt100 |
| Temperature measurement range | 0~85 °C |
| Temperature accuracy | ±0.1 °C |
| Housing | Acrylic |
| pH Sensor | |
| Measurement range | 0 ~14 pH |
| Measurement range | 0 ~14 pH |
| Accuracy | 0 ~14 pH |
| Resolution | 0.01 pH |
| Repeatability | ±1% FS |
| Operating pressure | Max. 10 Kgf/cm2 (optional) |
| Operating temperature | 0 ~ 85 °C |
| Process flow rate | 0.1l /min |
| Repeatability | ±1% FS |
| Response time | 1 sec |
| Dimension | SMR03-1: 152(W)x168(H)x118(D) mm SMR03-2: 215(W)x300(H)x155(D) mm |
| Weight | transmitter: approx. 500 g; cable: 80 g/m |
Loop Connection
Hub Connection
Ordering Codes
Want to know more?
Write to us at [email protected] or call us on
987 029 6354 or just click here to send us your query.
